Cutting capacity: Single cut (Round: Φ330mm, Angle: 330mm), Bundle cut: (Height x Width) 25-160 x 150-250mm

Motor power: Saw blade: 3.7kW (4P, 200V (50/60Hz), 220V (60Hz)), Hydraulic: 1.5kW (4P, 200V (50/60Hz), 220V (60Hz)), Cutting fluid: 0.18kW (2P, 200V (50/60Hz), 220V (60Hz))

Power supply voltage: AC200V ± 10% (50/60Hz), AC220V ± 10% (60Hz)

Temperature: Operating: 0 to +40℃ / Non-operating: -5 to +50℃

Humidity: Operating: 30 to 90% / Non-operating: 10 to 95% (no condensation)

Operating circuit voltage: AC100V, DC24V

Saw blade dimensions: (Width x Thickness x Length) 32 x 1.06 x 4115mm

Saw blade running speed: 15-120m/min (50Hz/60Hz) (Stepless speed change)

Tensioner: Hydraulic (with saw blade breakage and slip detection function)

Guide: surface: Insert 4-point support / Back side: Backup chip

Cutting fluid tank capacity: 48L

Pump capacity: 75L/min (50Hz), 100L/min (60Hz) Hydraulic tank capacity: 33L

Pump capacity: 22L/min (50Hz), 26L/min (60Hz)

Set pressure: 3.5MPa

Saw blade control (Up): Automatic: Hydraulic automatic rise (automatic stop at the top)/Manual: Inch up by push-button operation/Rise height setting: Automatic setting by quick approach device

Saw blade control (Down): Automatic: Quick approach device for rapid descent/Manual: Inch down by push-button operation

Slip detection: Automatic stop in case of overload, jamming, or breakage

Hydraulic type, torque (reciprocating) type

Stroke: Maximum 500mm, selectable standby position

Remainder length for a gripping allowance of 10mm Single cut: 58mm / Bundle cut: 198mm

Left guide bracket: Automatic tracking to match material width

Chip processing: Chip conveyor (hydraulic automatic screw type)

Cover: Integral wheel cover / Cover open LS equipped / Saw blade stops running when the door is opened

Table height: 700mm

Saw blade tilt angle: 50°

Maximum load weight: 2000kg (machine body)

Machine dimensions (width x depth x height): 2155 x 2565 x 1730mm

Machine weight: Approx. 1800kg