Table Swing (mm): 300

Distance between Centers (mm): 450

Grindable External Diameter (mm): 150

Workpiece Weight (kg): 80

Grinding Wheel Size (Diameter x Width x Bore) (mm): φ405×(16-75)×φ152.4

Grinding Wheel Speed (rpm): 1500

Maximum Operating Speed of Grinding Wheel (m/min): 2000

Grinding Wheel Table Full Travel (mm): 150

Manual Infeed of Grinding Wheel Table (mm): 125

Rapid Movement of Grinding Wheel Table (mm): 25

Grinding Wheel Table Manual Feed per Handle Rotation (mm): φ2

Microcollar Scale per Increment on Grinding Wheel Table (mm): φ0.005

Grinding Wheel Table Swivel Angle: Non-Swiveling Type

Maximum Automatic Intermittent Infeed (mm): φ9.999

Minimum Automatic Intermittent Infeed (mm): φ0.001

Maximum Automatic Intermittent Infeed Speed (mm/min): 7.999

Minimum Automatic Intermittent Infeed Speed (mm/min): 0.111

Automatic Intermittent Position: With switch for center push side, spindle side, and both axis switching

Maximum Automatic Continuous Infeed (mm): φ9.999

Minimum Automatic Continuous Infeed (mm): φ0.001

Maximum Automatic Continuous Infeed Speed (mm/min): 7.999

Minimum Automatic Continuous Infeed Speed (mm/min): 0.111

Spark Out Time (sec): 0-99

Table Movement (mm): 580

Table Feed per Handle Wheel Rotation (mm): 20

Table Swivel Angle (°): Left Swivel 8°30′, Right Swivel -4°30′

Table Feed Speed Conversion Number: 1

Table Feed Speed (mm/min): 10-2000

Spindle Taper Hole: MT.NO4

Spindle Through-Hole Diameter (mm): 20

Spindle Speed Conversion Number: 4

Spindle Speed (rpm): 60Hz 65-155-260-365, 50Hz 55-130-215-295

Spindle Swivel Angle (°): Center towards operator side 30°, Center towards grinding wheel side 90°

Spindle Rotation Type: Dead Center Type

Tailstock Taper Hole: MT.NO4

Tailstock Retraction Amount (mm): 35